Simpson Strong Ties

The FB is designed for connecting fence rails to posts. The simple design of this fence rail bracket provides strong connections without the need for toe nails or screws. The versatility of the FB makes planning and building fences, deck/porch railings and louvers fast and easy.

Finish: Z-Max (for use with pressure treated wood)

Installation: holes are sized for 10d x 1 1/2″ HDG nails

Angles provide a way to make a wide range of 90° connections.

The HT is designed for beam-to-column applications. This heavy, versatile utility strap is T-shaped, making it ideal for transferring tension loads in a variety of applications. Installed in pairs, the T is load rated and can easily be installed with bolts.

The T is designed for beam-to-column applications. This versatile utility strap is T-shaped, making it ideal for transferring tension loads in a variety of applications. The T features well-placed fastener holes and can easily be installed with nails or bolts.

The L is designed for beam-to-column applications. This versatile utility strap is L-shaped, making it ideal for transferring tension loads in a variety of applications. The L features well-placed fastener holes and can easily be installed with nails or bolts

The MSTA is designed to resist tension loads in wood-to-wood applications. This medium strap tie utilizes a staggered nail pattern to help minimize wood splitting. The MSTA is designed for use on the edge of 2x members.

The A35 is a balanced and completely reversible framing angle designed for making a variety of connections. The angle’s exclusive bend slot allows instant and accurate field bends for all two- and three-way ties. The A35 is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation.

The ML angle combines strength and versatility through the use of Strong-Drive® SDS Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.

The LS connector is a cost-effective method for connecting roof rafters to hip rafters. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The LS has well-defined fastener locations, and testing ensures that the tabulated load values account for connection eccentricities.

The LSC adjustable stair-stringer connector offers a versatile, concealed connection between the stair stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair stringer pitches, the LSC connector is suitable for either solid or notched stringers.

For use in structurally sound staircase framing. The TA eliminates costly conventional notching.

The NS is designed to prevent nails from piercing and damaging mechanical, electrical and plumbing pipes and lines. To protect supply lines, the nail stopper is installed over each point where utilities pass through framing members. The NS meets all building code requirements to provide protection against physical damage to utility lines.

The DJT14Z deck joist tie is designed to attach 2x deck joists to the side of 4x or larger support posts. The DJT14Z can be installed with either nails or bolts.

The SUR/L are 45°-skewed hangers designed to support solid sawn and engineered wood products used in wood construction. These U-shaped hangers encapsulate the top flange of the joist, so no web stiffeners are required for standard installation. The SUR and SUL hangers are identical except that they are skewed 45° to the right (SUR) and the left (SUL), respectively.

The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8″ gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood panels, the PSCL reduces deflection and keeps panels even to maintain a level plane on the structure.

3/8”, 7/16”, ½”, 5/8”

(Doubles and Triples Also available)

The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value engineered for strength and economy and provides for easier and faster installation.

The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value engineered for strength.

The LPCZ is designed for a variety of connections between a 4x or 6x beam and a post. This versatile, light post cap has an adjustable design that allows for connection versatility in both new and retrofit applications where structural support is needed. The LPCZ has a ZMAX® coating, a thicker galvanized finish that helps to extend the service life of the connector.

The BCS is designed to connect a multi-ply member beam to a post. The dimensions of this post cap accommodate the narrower width of multiple 2x members on top of the post. The BCS provides both lateral and uplift support and features double-shear nailing that distributes the load through two points for optimal strength.

The BC post cap is designed to connect a beam to a post. The 18-gauge material of this post cap makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber.

The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts.

The H1Z provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1Z is designed for nominal 2x lumber. These U-shaped hurricane ties provide faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance.

LRU26Z, LRU28Z, LRU210Z

The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid sawn rafters, the LRUZ’s unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders

The TP is designed to join and reinforce wood members. This versatile and easy-to-use tie plate is ideal for splicing and for reinforcing all types of wood-to-wood connections. The TP features a nail-on design for quick and easy installation.

Versatile and easy-to-use mending plates for wood-to-wood connections. No nails or notching of wood required. For non-structural applications only; not for truss applications.

IUS1.81/9.5, IUS1.81/11.88, IUS2.56/9.5, IUS3.56/9.5, IUS3.56/11.88

The Strong-Grip™ seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.

The ICFVL ledger connector system is engineered to meet the challenges of mounting wood or steel ledgers to insulated concrete form (ICF) walls up to 4 1/2″ in thickness as specified by the designer. The ICFVL is designed to provide both vertical and lateral in-plane performance. The system offers many benefits over traditional anchor bolting, including better on-center spacing in most cases, faster installation and no protrusions.

The ICFVL-W/ICFVL-CW is designed to be used with the ICFVL ledger connector system for mounting wood ledgers to insulated concrete form (ICF) walls. The ICFVL-W is to be used when using single 2x ledger sizes. The ICFVL-CW is to be used when using single LVL ledger sizes.

(3.5 and 5.5 also in Powder Coated Black)

The popular RCPS rebar carport saddle works as a cast in place or post-installed saddle for connecting posts to concrete. Now it has been redesigned with added features that offer greater installation flexibility and strength. Along with these design improvements, the RCPS is also available in a black powder-coat for applications that call for a more finished look.

The ABA is designed to attach wooden posts to existing concrete. The built-in 1″ standoff of this adjustable post base helps to prevent rot at the end of the post. The ABA has a slotted anchor hole in the base for adjustability and attaches to the post with nails or Strong-Drive® SD Connector screws. This versatile post base makes a cost-effective option for securing a post to the foundation.

This post base is available in model sizes for double 2x, 4×4, 4×6 and 6×6 lumber, both nominal and rough. The new double 2x size can be used for installing a structural post consisting of two 2×4 studs nailed together as well as for securing double 2x beams to a footing for ground-level decks.

The HBC is a post-installed saddle that offers installation flexibility and strength for connecting to 4x or 6x dressed wood posts. This post base is ideal for light connections such as patio covers, deck trellises and pergolas. With a hot-dip galvanized finish, the HBC provides additional corrosion protection for outdoor projects.

The L-Bolt anchor bolts are used to attach sill plates to concrete or masonry foundations, provide anchorage for light weight post bases and for general anchorage to concrete. 

The HHUS is designed for applications where higher loads are needed. This heavy-capacity hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength.

The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength.

The HGUS is an extra-heavy-capacity hanger for applications requiring girder support. This girder hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength.